-
I-Series
• Flir i3
• Flir i5
• Flir i7
E-Series
• Flir e40
• Flir e50
• Flir e60
T-Series
P-Series
• Flir p50
GF-Series
A-Series
SC-Series
Accessories
FLIR GF 306 Thailand Infrared Camera Specifications
The new FLIR GF300 is a revolutionary infrared camera capable of finding Methane emissions or other Volatile Organic Compounds (VOC). It is also unbeatable for detecting even the smallest gas leaks.
FLIR GF300 can scan large areas rapidly and pinpoint leaks in real time. It is ideal for monitoring plants that it is difficult to reach with contact measurement tools. Literally thousands of components can be scanned per shift without the need to interrupt the process. It reduces repair downtime and provides verification of the process. And above all it isexceptionally safe, allowing potentially dangerous leaks to be monitored from several meters away.
FLIR GF300 will significantly improve your work safety, environmental and regulatorycompliance, not to mention helping to improve the bottom line by finding leaks that essentially decrease profits.
Imaging Performance |
|
Field of view/min focus distance | 24° x 18° / 0.3 m |
Lens identification | Automatic |
F-number | 1.5 |
Thermal sensitivity/NETD | <25 mK @ +30°C |
Focus | Automatic (one touch) or manual (electric or on the lens) |
Zoom | 1–8× continuous, digital zoom |
Digital image enhancement | Noise reduction filter, scene based NUC, High Sensitivity Mode (HSM) |
Focal Plane Array (FPA) / Spectral range | Cooled InSb / 3.2–3.4 μm |
IR resolution | 320 × 240 pixels |
Detector pitch | 30 μm |
Sensor cooling | Stirling Microcooler (FLIR MC-3) |
Electronics and data rate |
|
Full frame rate | 60 Hz |
Image presentation |
|
Display | Built-in widescreen, 4.3 in. LCD, 800 × 480 pixels |
Viewfinder | Built-in, tiltable OLED, 800 × 480 pixels |
Automatic image adjustment | Continuous/manual; linear or histogram based |
Manual image adjustment | Level/span |
Image modes | IR-image, visual image, High Sensitivity Mode (HSM) |
Measurement |
|
Temperature range | –40 to +500°C |
Set-up |
|
Menu commands | Level, span Auto adjust continuous/manual/semi-automatic Zoom Palette Start/stop recording Store image Playback/recall image |
Set-up commands | 1 programmable button, local adaptation of units, language, date and time formats |
Web interface | Admin camera setup and viewing IR images |
Storage of images |
|
Image storage type | Removable SD or SDHC Memory Card, two card slots |
Image storage capacity | > 1200 images (JPEG) with post process capability per GB on memory card |
Image storage mode | IR/visual images. Visual image is automatically associated with corresponding IR image. |
Periodic image storage | Every 10 seconds up to 24 hours |
File formats | Standard JPEG, 14 bit measurement data included |
GPS | Location data automatically added to every image from built-in GPS |
Video recording and streaming |
|
Non radiometric IR-video recording | MPEG4/H.264 (up to 60 minutes/clip) to memory card. Visual image can automatically be associated with corresponding recording of non-radiometric IR-video. |
Non radiometric IR-video streaming | RTP/ H.264 |
Digital camera |
|
Built-in digital camera | 3.2 Mpixel, auto focus, and two video lamps |
Digital camera video recording | MPEG/H.264 (25 minutes/ clip) to memory card |
Laser pointer |
|
Laser | Activated by dedicated button |
Data communication interfaces |
|
USB | USB-A: Connect external USB device (e.g. memory stick) USB Mini-B: Data transfer to and from PC |
USB, standardVideo | USB Mini-B: 2.0 High Speed |
Video | Digital Video Output (image) |
Power system |
|
Battery type | Rechargeable Li Ion battery |
Battery voltage | 7.2 V |
Battery operating time | > 3 hours at 25°C and typical use |
Charging system | In camera (AC adapater or 12 V from a vehicle) or 2 bay charger |
Charging time | 2.5 h to 95% capacity, charging status indicated by LED's |
Start-up time | Stirling cool down: < 5 min. @ 25°C |
FLIR GF306 is an infrared camera capable of finding Sulfur Hexafluoride (SF6), the "greenhouse gas" with an estimated atmospheric lifetime of 3,200 years
Visualizes gas leaks in real time
FLIR GF306 scans large areas rapidly and pinpoints leaks in real time. It is ideal for monitoring plants that is difficult to reach with contact measurement tools. Literally thousands of components can be scanned per shift without the need to interrupt the process. It reduces repair downtime and provides verification of the process. And above all it is exceptionally safe, allowing potentially dangerous leaks to be monitored from several meters away.
FLIR GF306 will significantly improve your work safety, environmental and regulatory compliance, not to mention helping to improve the bottom line by finding leaks that essentially decrease profits.